This Redboot binary was compiled from the content of the eCos anonymous CVS
repository on August 29, 2001 for the Assabet target.

To install Redboot in your Assabet's flash memory, you need the Jflash utility
available from the same FTP site as where you found this Redboot file.  This
utility allows you to flash Redboot (or any other bootloader) via the JTAG
cable hooked to your PC's parallel port.  This cable is part if the Assabet's
developers's kit.  Read the documentation included in the Jflash archive for
more details.

Basically, you just need to execute the following command:

	Jflash-linux redboot.bin

When completed, you'll need to reset your Assabet.  Redboot uses the serial
port at 38400 bauds, 8 data bits, no parity, 1 stop bit, with all flow control
settings turned off.  Be sure you correctly set those parameters in your
terminal program (such as minicom) before you reset the Assabet.

The RedBoot User's Guide is available on-line at:
http://sources.redhat.com/ecos/docs-latest/redboot/redboot.html

For more information on Redboot, see:
http://sources.redhat.com/redboot/


Nicolas Pitre <nico@cam.org>
August 29, 2001