- general/ansi_colors.stp - Color Table for ansi_set_color2() and ansi_set_color3()
keywords: FORMAT
The script prints a table showing the available color combinations for the ansi_set_color2() and ans_set_color3() functions in the ansi.stp tapset.
- general/ansi_colors2.stp - Show Attribues in Table for ansi_set_color3()
keywords: FORMAT
The script prints a table showing the available attributes (bold, underline, and inverse) with color combinations for the ans_set_color3() function in the ansi.stp tapset.
- general/badname.stp - Bad Filename Filter
keywords: FILESYSTEM HACK
The badname.stp script shows how one could prevent the creation of files with undesirable names using guru mode.
- general/graphs.stp - Graphing Disk and CPU Utilization
keywords: DISK CPU USE GRAPH
The script tracks the disk and CPU utilization. The resulting output of the script can be piped into gnuplot to generate a graph of disk and CPU USE.
- general/helloworld.stp - SystemTap "Hello World" Program
keywords: SIMPLE
A basic "Hello World" program implemented in SystemTap script. It prints out "hello world" message and then immediately exits.
- general/para-callgraph.stp - Callgraph tracing with arguments
keywords: TRACE CALLGRAPH
Print a timed per-thread callgraph, complete with function parameters and return values. The first parameter names the function probe points to trace. The optional second parameter names the probe points for trigger functions, which acts to enable tracing for only those functions that occur while the current thread is nested within the trigger.
- interrupt/scf.stp - Tally Backtraces for Inter-Processor Interrupt (IPI)
keywords: INTERRUPT BACKTRACE
The Linux kernel function smp_call_function causes expensive inter-processor interrupts (IPIs). The scf.stp script tallies the processes and backtraces causing the interprocessor interrupts to identify the cause of the expensive IPI. On exit the script prints the tallies in descending frequency.
- io/disktop.stp - Summarize Disk Read/Write Traffic
keywords: DISK
Get the status of reading/writing disk every 5 seconds, output top ten entries during that period.
- io/io_submit.stp - Tally Reschedule Reason During AIO io_submit Call
keywords: IO BACKTRACE
When a reschedule occurs during an AIO io_submit call, accumulate the traceback in a histogram. When the script exits prints out a sorted list from most common to least common backtrace.
- io/ioblktime.stp - Average Time Block IO Requests Spend in Queue
keywords: IO
The ioblktime.stp script tracks the amount of time that each block IO requests spend waiting for completion. The script computes the average time waiting time for block IO per device and prints list every 10 seconds. In some cases there can be too many outstanding block IO operations and the script may exceed the default number of MAXMAPENTRIES allowed. In this case the allowed number can be increased with "-DMAXMAPENTRIES=10000" option on the stap command line.
- io/iostat-scsi.stp - iostat for SCSI Devices
keywords: IO PROFILING SCSI
The iostat-scsi.stp script provides a breakdown of the number of blks read and written on the machine's various SCSI devices. The script takes one argument which is the number of seconds between reports.
- io/iostats.stp - List Executables Reading and Writing the Most Data
keywords: IO PROFILING
The iostat.stp script measures the amount of data successfully read and written by all the executables on the system. The output is sorted from most greatest sum of bytes read and written by an executable to the least. The output contains the count of operations (opens, reads, and writes), the totals and averages for the number of bytes read and written.
- io/iotime.stp - Trace Time Spent in Read and Write for Files
keywords: SYSCALL READ WRITE TIME IO
The script watches each open, close, read, and write syscalls on the system. For each file the scripts observes opened it accumulates the amount of wall clock time spend in read and write operations and the number of bytes read and written. When a file is closed the script prints out a pair of lines for the file. Both lines begin with a timestamp in microseconds, the PID number, and the executable name in parentheses. The first line with the "access" keyword lists the file name, the attempted number of bytes for the read and write operations. The second line with the "iotime" keyword list the file name and the number of microseconds accumulated in the read and write syscalls.
- io/iotop.stp - Periodically Print I/O Activity by Process Name
keywords: IO
Every five seconds print out the top ten executables generating I/O traffic during that interval sorted in descending order.
- io/traceio.stp - Track Cumulative I/O Activity by Process Name
keywords: IO
Every second print out the top ten executables sorted in descending order based on cumulative I/O traffic observed.
- io/traceio2.stp - Watch I/O Activity on a Particular Device
keywords: IO
Print out the executable name and process number as reads and writes to the specified device occur.
- io/ttyspy.stp - Monitor tty typing.
keywords: IO TTY PER-PROCESS MONITOR
The ttyspy.stp script uses tty_audit hooks to monitor recent typing activity on the system, printing a scrolling record of recent keystrokes, on a per-tty basis.
- locks/bkl.stp - Tracing Contention on Big Kernel Lock (BKL)
keywords: LOCKING
The bkl.stp script can help determine whether the Big Kernel Lock (BKL) is causing serialization on a multiprocessor system due to excessive contention of the BKL. The bkl.stp script takes one argument which is the number of processes waiting for the Big Kernel Lock (BKL). When the number of processes waiting for the BKL is reached or exceeded, the script will print a time stamp, the number of processes waiting for the BKL, the holder of the BKL, and the amount of time the BKL was held.
- locks/bkl_stats.stp - Per Process Statistics on Big Kernel Lock (BKL) Use
keywords: LOCKING
The bkl_stats.stp script can indicate which processes have excessive waits for the Big Kernel Lock (BKL) and which processes are taking the BKL for long periods of time. The bkl_stats.stp script prints lists of all the processes that require the BKL. Every five seconds two tables are printed out. The first table lists the processes that waited for the BKL followed by the number of times that the process waited, the minimum time of the wait, the average and the maximum time waited. The second table lists has similar information for the time spent holding the lock for each of the processes.
- memory/kmalloc-top - Show Paths to Kernel Malloc (kmalloc) Invocations
keywords: MEMORY
The kmalloc-top perl program runs a small systemtap script to collect stack traces for each call to the kmalloc function and counts the time that each stack trace is observed. When kmalloc-top exits it prints out sorted list. The output can be be filtered to print only only the first stack traces (-t) stack traces with more a minimum counts (-m), or exclude certain stack traces (-e).
- memory/mmanonpage.stp - Track Virtual Memory System Actions on Anonymous Pages
keywords: MEMORY
The mmanonpage.stp script uses the virtual memory tracepoints available in some kernels to track the number of faults, user space frees, page ins, copy on writes and unmaps for anonymous pages. When the script is terminated the counts are printed for each process that allocated pages while the script was running. This script displays the anonymous page statistics for each process that ran while the script is active. Its useful in debugging leaks in the anonymous regions of a process.
- memory/mmfilepage.stp - Track Virtual Memory System Actions on File Backed Pages
keywords: MEMORY
The mmfilepage.stp script uses the virtual memory tracepoints available in some kernels to track the number of faults, copy on writes mapping, and unmapping operations for file backed pages. When the script is terminated the counts are printed for each process that allocated pages while the script was running. The mmfilepage.stp script is useful in debugging leaks in the mapped file regions of a process.
- memory/mmreclaim.stp - Track Virtual Memory System Page Reclamation
keywords: MEMORY
The mmreclaim.stp script uses the virtual memory tracepoints available in some kernels to track page reclaim activity that occurred while the script was running. Its useful is debugging performance problems that occur due to page reclamation.
- memory/mmwriteback.stp - Track Virtual Memory System Writing to Disk
keywords: MEMORY
The mmwriteback.stp script uses the virtual memory tracepoints available in some kernels to report all of the file writebacks that occur form kupdate, pdflush and kjournald while the script is running. Its useful in determining where writes are coming from on a supposedly idle system that is experiencing unexpected IO.
- memory/numa_faults.stp - Summarize Process Misses across NUMA Nodes
keywords: MEMORY NUMA
The numa_faults.stp script tracks the read and write pages faults for each process. When the script exits it prints out the total read and write pages faults for each process. The script also provide a break down of page faults per node for each process. This script is useful for determining whether the program has good locality (page faults limited to a single node) on a NUMA computer.
- memory/pfaults.stp - Generate Log of Major and Minor Page Faults
keywords: MEMORY
The pfaults.stp script generates a simple log for each major and minor page fault that occurs on the system. Each line contains a timestamp (in microseconds) when the page fault servicing was completed, the pid of the process, the address of the page fault, the type of access (read or write), the type of fault (major or minor), and the elapsed time for page fault. This log can be examined to determine where the page faults are occurring.
- network/autofs4.stp - Watch autofs4 operations
keywords: NETWORK AUTOFS NFS
Trace key autofs4 operations such as mounting or unmounting remote filesystems.
- network/dropwatch.stp - Watch Where Socket Buffers are Freed in the Kernel
keywords: NETWORK TRACEPOINT BUFFER FREE
Every five seconds the dropwatch.stp script lists the number of socket buffers freed at locations in the kernel.
- network/netdev.stp - Trace Activity on Network Devices
keywords: NETWORK DEVICE TRAFFIC
The netdev.stp script traces configuration and transmit/receive activity on network devices.
- network/nettop.stp - Periodic Listing of Processes Using Network Interfaces
keywords: NETWORK TRAFFIC PER-PROCESS
Every five seconds the nettop.stp script prints out a list of processed (PID and command) with the number of packets sent/received and the amount of data sent/received by the process during that interval.
- network/sk_stream_wait_memory.stp - Track Start and Stop of Processes Due to Network Buffer Space
keywords: NETWORK TCP BUFFER MEMORY
The sk_stream-wait_memory.stp prints a time stamp, executable, and pid each time a process blocks due to the send buffer being full. A similar entry is printed each time a process continues because there is room in the buffer.
- network/socket-trace.stp - Trace Functions called in Network Socket Code
keywords: NETWORK SOCKET
The script instrument each of the functions inn the Linux kernel's net/socket.c file. The script prints out trace. The first element of a line is time delta in microseconds from the previous entry. This is followed by the command name and the PID. The "->" and "<-" indicates function entry and function exit, respectively. The last element of the line is the function name.
- network/tcp_connections.stp - Track Creation of Incoming TCP Connections
keywords: NETWORK TCP SOCKET
The tcp_connections.stp script prints information for each new incoming TCP connection accepted by the computer. The information includes the UID, the command accepting the connection, the PID of the command, the port the connection is on, and the IP address of the originator of the request.
- network/tcpdumplike.stp - Dump of Received TCP Packets
keywords: NETWORK TRAFFIC
The tcpdumplike.stp prints out a line for each TCP packet received. Each line includes the source and destination IP addresses, the source and destination ports, and flags.
- network/tcpipstat.stp - Display network statistics for individual TCP sockets.
keywords: NETWORK STATISTICS
tcpipstat collects and display network statistics related to individual TCP sockets or groups of sockets. The statistics that are collected are simmer to that of the command netstat -s, only sorted and grouped by individual sockets.
- process/chng_cpu.stp - Monitor Changes in Processor Executing a Task
keywords: SCHEDULER
The chng_cpu.stp script takes an argument which is the executable name of the task it should monitor. Each time a task with that executable name is found running on a different processor, the script prints out the thread id (tid), the executable name, the processor now running the task, the thread state, and a backtrace showing the kernel functions that triggered the running of the task on the processor.
- process/errsnoop.stp - tabulate system call errors
keywords: PROCESS SYSCALL
The script prints a periodic tabular report about failing system calls, by process and by syscall failure. The first optional argument specifies the reporting interval (in seconds, default 5); the second optional argument gives a screen height (number of lines in the report, default 20).
- process/forktracker.stp - Trace Creation of Processes
keywords: PROCESS SCHEDULER
The forktracker.stp script prints out a time-stamped entry showing each fork and exec operation on the machine. This can be useful for determine what process is creating a flurry of short-lived processes.
- process/futexes.stp - System-Wide Futex Contention
keywords: SYSCALL LOCKING FUTEX
The script watches the futex syscall on the system. On exit the futexes address, the number of contentions, and the average time for each contention on the futex are printed from lowest pid number to highest.
- process/migrate.stp - Track the Migration of Specific Executables
keywords: SCHEDULER
The migrate.stp script takes an argument which is the executable name of the task it should monitor. Each time a task with that executable name migrates between processors an entry is printed with the process id (pid), the executable name, the processor off loading the task, and the process taking the task. Note that the task may or may not be executing at the time of the migration.
- process/pf2.stp - Profile kernel functions
keywords: PROFILING
The pf2.stp script sets up time-based sampling. Every five seconds it prints out a sorted list with the top ten kernel functions with samples.
- process/schedtimes.stp - Track Time Processes Spend in Various States using Tracepoints
keywords: PROCESS SCHEDULER TIME TRACEPOINT
The schedtimes.stp script instruments the scheduler to track the amount of time that each process spends running, sleeping, queued, and waiting for io. On exit the script prints out the accumulated time for each state of processes observed. Optionally, this script can be used with the '-c' or '-x' options to focus on a specific PID.
- process/sig_by_pid.stp - Signal Counts by Process ID
keywords: SIGNALS
Print signal counts by process ID in descending order.
- process/sig_by_proc.stp - Signal Counts by Process Name
keywords: SIGNALS
Print signal counts by process name in descending order.
- process/sigkill.stp - Track SIGKILL Signals
keywords: SIGNALS
The script traces any SIGKILL signals. When that SIGKILL signal is sent to a process, the script prints out the signal name, the destination executable and process ID, the executable name user ID that sent the signal.
- process/sigmon.stp - Track a particular signal to a specific process
keywords: SIGNALS
The script watches for a particular signal sent to a specific process. When that signal is sent to the specified process, the script prints out the PID and executable of the process sending the signal, the PID and executable name of the process receiving the signal, and the signal number and name.
- process/sleepingBeauties.stp - Generating Backtraces of Threads Waiting for IO Operations
keywords: IO SCHEDULER BACKTRACE
The script monitors the time that threads spend waiting for IO operations (in "D" state) in the wait_for_completion function. If a thread spends over 10ms, its name and backtrace is printed, and later so is the total delay.
- process/sleeptime.stp - Trace Time Spent in nanosleep Syscalls
keywords: SYSCALL SLEEP
The script watches each nanosleep syscall on the system. At the end of each nanosleep syscall the script prints out a line with a timestamp in microseconds, the pid, the executable name in parentheses, the "nanosleep:" key, and the duration of the sleep in microseconds.
- process/syscalls_by_pid.stp - System-Wide Count of Syscalls by PID
keywords: SYSCALL
The script watches all syscall on the system. On exit the script prints a list showing the number of systemcalls executed by each PID ordered from greatest to least number of syscalls.
- process/syscalls_by_proc.stp - System-Wide Count of Syscalls by Executable
keywords: SYSCALL
The script watches all syscall on the system. On exit the script prints a list showing the number of systemcalls executed by each executable ordered from greatest to least number of syscalls.
- process/wait4time.stp - Trace Time Spent in wait4 Syscalls
keywords: SYSCALL WAIT4
The script watches each wait4 syscall on the system. At the end of each wait4 syscall the script prints out a line with a timestamp in microseconds, the pid, the executable name in parentheses, the "wait4:" key, the duration of the wait and the PID that the wait4 was waiting for. If the waited for PID is not specified , it is "-1".
- profiling/functioncallcount.stp - Count Times Functions Called
keywords: PROFILING FUNCTIONS
The functioncallcount.stp script takes one argument, a list of functions to probe. The script will run and count the number of times that each of the functions on the list is called. On exit the script will print a sorted list from most frequently to least frequently called function.
- profiling/thread-times.stp - Profile kernel functions
keywords: PROFILING
The thread-times.stp script sets up time-based sampling. Every five seconds it prints out a sorted list with the top twenty processes with samples broken down into percentage total time spent in user-space and kernel-space.
- profiling/timeout.stp - Show Processes Doing Polling Operations
keywords: PROFILING
The timeout.stp script is based on a blog entry (http://udrepper.livejournal.com/19041.html) mentioning a need for a tool to help developers find applications that are polling. The timeout.stp script monitors systemcall used for polling and records the systemcalls that timed out rather than returned because some action occurred. The script updates the screen once a second with the top twenty processes.
- profiling/topsys.stp - Show Processes Doing Polling Operations
keywords: PROFILING
The topsys.stp script lists out the top twenty systemcalls for the previous 5 seconds. The output is sorted from most frequent to least frequent.
