# File generated by xf86config. # # Copyright (c) 1994 by The XFree86 Project, Inc. # # Permission is hereby granted, free of charge, to any person obtaining a # copy of this software and associated documentation files (the "Software"), # to deal in the Software without restriction, including without limitation # the rights to use, copy, modify, merge, publish, distribute, sublicense, # and/or sell copies of the Software, and to permit persons to whom the # Software is furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice shall be included in # all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL # THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE # SOFTWARE. # # Except as contained in this notice, the name of the XFree86 Project shall # not be used in advertising or otherwise to promote the sale, use or other # dealings in this Software without prior written authorization from the # XFree86 Project. # # ********************************************************************** # Refer to the XF86Config(4/5) man page for details about the format of # this file. # ********************************************************************** # ********************************************************************** # Files section. This allows default font and rgb paths to be set # ********************************************************************** Section "Files" # The location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default. RgbPath "/usr/X11R6/lib/X11/rgb" # Multiple FontPath entries are allowed (which are concatenated together), # as well as specifying multiple comma-separated entries in one FontPath # command (or a combination of both methods) # # If you don't have a floating point coprocessor and emacs, Mosaic or other # programs take long to start up, try moving the Type1 and Speedo directory # to the end of this list (or comment them out). # FontPath "/usr/X11R6/lib/X11/fonts/misc/" FontPath "/usr/X11R6/lib/X11/fonts/Type1/" FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" EndSection # ********************************************************************** # Server flags section. # ********************************************************************** Section "ServerFlags" # Uncomment this to cause a core dump at the spot where a signal is # received. This may leave the console in an unusable state, but may # provide a better stack trace in the core dump to aid in debugging # NoTrapSignals # Uncomment this to disable the server abort sequence # This allows clients to receive this key event. # DontZap # Uncomment this to disable the / mode switching # sequences. This allows clients to receive these key events. # DontZoom EndSection # ********************************************************************** # Input devices # ********************************************************************** # ********************************************************************** # Keyboard section # ********************************************************************** Section "Keyboard" Protocol "Standard" # when using XQUEUE, comment out the above line, and uncomment the # following line # Protocol "Xqueue" AutoRepeat 500 5 # Let the server do the NumLock processing. This should only be required # when using pre-R6 clients # ServerNumLock # Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1)) # Xleds 1 2 3 # To set the LeftAlt to Meta, RightAlt key to ModeShift, # RightCtl key to Compose, and ScrollLock key to ModeLock: LeftAlt Meta RightAlt Meta RightCtl Compose ScrollLock Control # To disable the XKEYBOARD extension, uncomment XkbDisable. # XkbDisable # To customise the XKB settings to suit your keyboard, modify the # lines below (which are the defaults). For example, for a non-U.S. # keyboard, you will probably want to use: # XkbModel "pc102" # If you have a US Microsoft Natural keyboard, you can use: # XkbModel "microsoft" # # Then to change the language, change the Layout setting. # For example, a german layout can be obtained with: # XkbLayout "de" # or: # XkbLayout "de" # XkbVariant "nodeadkeys" # # If you'd like to switch the positions of your capslock and # control keys, use: # XkbOptions "ctrl:swapcaps" # These are the default XKB settings for XFree86 # XkbRules "xfree86" # XkbModel "pc101" # XkbLayout "us" # XkbVariant "" # XkbOptions "" XkbKeycodes "xfree86" XkbTypes "default" XkbCompat "default" XkbSymbols "us(pc101)" XkbGeometry "pc" XkbRules "xfree86" XkbModel "pc101" XkbLayout "us" EndSection # ********************************************************************** # Pointer section # ********************************************************************** Section "Pointer" Protocol "PS/2" # Protocol "Microsoft" Device "/dev/mouse" # When using XQUEUE, comment out the above two lines, and uncomment # the following line. # Protocol "Xqueue" # Baudrate and SampleRate are only for some Logitech mice # BaudRate 1200 # SampleRate 150 # Emulate3Buttons is an option for 2-button Microsoft mice # Emulate3Timeout is the timeout in milliseconds (default is 50ms) # Emulate3Buttons # Emulate3Timeout 50 # ChordMiddle is an option for some 3-button Logitech mice # ChordMiddle EndSection # ********************************************************************** # Monitor section # ********************************************************************** # Any number of monitor sections may be present Section "Monitor" Identifier "Vision-Master-21" VendorName "Iiyama" ModelName "MT-9221" HorizSync 27-110 VertRefresh 50-160 # Monitor: IDEK Iiyama MF-8617 Vision Master # Contributor: Gunar Schorcht [schorcht@theoinf.tu-ilmenau.de] # Comments: max 86kHz horizontal refresh # Last Edit Date: 07/14/94 # # Mode Refresh(Hz) Hor.Sync(kHz) Clock(MHz) # ------------------------------------------------------------------------ # 640x480 72 37.9 31.5 # 800x600 71 50.0 50.0 # 1024x768 75 62.5 85.0 # 1152x900 75 71.0 110.0 # 1280x1024 61 64.3 110.0 # 1280x1024 74 78.8 135.0 # # name clock horizontal timing vertical timing flags Modeline "640x480" 31.5 640 664 704 832 480 489 492 520 Modeline "800x600" 50 800 840 960 1000 600 637 643 700 Modeline "1024x768" 85 1024 1032 1152 1360 768 784 787 823 Modeline "1280x1024" 110 1280 1328 1512 1712 1024 1025 1028 1054 Modeline "1600x1200" 220 1600 1616 1808 2080 1200 1204 1207 1244 +HSync +VSync Modeline "1800x1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync EndSection # Graphics device section # ********************************************************************** # Any number of graphics device sections may be present # Standard VGA Device: Section "Device" Identifier "Matrox MGA" VendorName "Matrox" BoardName "Millenium II" Chipset "mga2164w" # Option "NOCLOCKPROBE" # VideoRam 256 # Clocks 25.2 28.3 EndSection # Sample Device for accelerated server: Section "Device" Identifier "Number Nine GXE Level 12" VendorName "Number-9" BoardName "GXE Level 12 3Mb" Chipset "s3_generic" # VideoRam 3072 # ClockChip "ics9161a" # ClockChip "icd2061a" # Option "dac_8_bit" # Option "number_nine" # Option "nolinear" # Option "nomemaccess" # Use Option "nolinear" if the server doesn't start up correctly # (this avoids the linear framebuffer probe). If that fails try # option "nomemaccess". # # Use Option "sw_cursor" if the server completely locked up # several times while you're moving the mouse. # # Refer to /usr/X11R6/lib/doc/README.S3, and the XF86_S3 man page. # Dacspeed 200 # Insert Clocks lines here if appropriate EndSection Section "Device" Identifier "Stealth 64 Video" VendorName "Diamond" BoardName "Stealth 64 Video VRAM PCI" Chipset "s3_generic" VideoRam 2048 # ClockChip "ics9161a" # ClockChip "icd2061a" Dacspeed 170 # Insert Clocks lines here if appropriate EndSection # ********************************************************************** # Screen sections # ********************************************************************** # The accelerated servers (S3, Mach32, Mach8, 8514, P9000, AGX, W32, Mach64) Section "Screen" Driver "SVGA" # Driver "accel" Device "Matrox MGA" # Device "Stealth 64 Video" Monitor "Vision-Master-21" Subsection "Display" Depth 8 # Modes "1280x1024" "1024x768" "800x600" "640x480" Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480" # Modes "640x480" "800x600" "1024x768" "1280x1024" # Modes "1024x768" "800x600" "640x480" # Modes "800x600" "640x480" ViewPort 0 0 # Virtual 1600 1200 EndSubsection Subsection "Display" Depth 16 Modes "1024x768" "640x480" "800x600" ViewPort 0 0 # Virtual 1024 768 EndSubsection Subsection "Display" Depth 32 Modes "1024x768" ViewPort 0 0 # Virtual 1024 768 EndSubsection EndSection